The BMS shall be designed to perform the following functions
-
Prevent firing unless a satisfactory furnace purge has first been completed.
-
Prohibit start-up of the equipment unless certain permissive interlocks have first been completed.
-
Monitor and control Monitor and control the correct component sequencing during start the correct component sequencing during start-up and shut up and shut- down of the equipment.
-
Provide component condition feedback to the operator and, if so equipped, to the plant control systems and/or data loggers.
-
Provide automatic supervision when the equipment is in service and provide means to make a Master Fuel Trip (MFT) should certain unacceptable firing conditions occur.
-
Execute a MFT upon certain adverse unit operating conditions…